CRESAMARC DIGITAL INK

CRESAMARC DIGITAL INK
 

Main Description: Special product of high performances developed for cleaning the pigmentary ink circuit, main tank, filters and piezoelectric heads.
 

Technical specifications
Aspect20/25 ºC :                             Transparent liquid
Viscosity at 30ºC :                           10 – 11 cps
Surface tension :                             29 -34 mN/m


Properties

Application

Injection heads cleaning
By injection with syringe inside the head through the ink inlet tube in it.
Do not apply a high pressure during the cleaning process.
Inject the ink to the display of a regular cleaner curtain through the nozzles. We recommend to disassemble the head to perform this operation. Cut off the power supply of the head before handling it.

Ultrasonic heads cleaning
Disassemble the head making sure to disconnect the power supply from it before beginning to handle it.
After performing the above process, make sure that the head is filled with cleaning liquid.
Place it in a cleaner bath in the ultrasonic device and set a temperature of 35ºC and a cleaning time of 5 min.
Once it is finished, remove the cleaning liquid from the head by extraction with the syringe. Clean well with cleaner and distilled water.
Exchange of inks
Load after emptying the CRESAMIN DIGITAL inks, circulate and empty until the circuit is clean. Add the cleaner of the new ink and the ink to be loaded later.
Storage
Keep in a cool and dry place in well-closed containers, a maximum of 24 months.